Roll-up Doors


Model 260H

An economical alternative to our sectional doors, and a great choice when minimum backroom is available.

260H – MINI-STORAGE DOOR

  • 26 gauge hot-dipped galvanized roll formed steel
  • Full height polypropylene wear strip on exterior of door
  • Heavy duty bottom bar with galvanized angle and vinyl astragal (weather strip)
  • 18 gauge hot-dipped galvanized steel guides
  • Outside mini lock standard
  • Manual drive
  • Available up to 10' wide and 10' high

270H – HEAVY-DUTY DOOR

  • 26 gauge hot-dipped galvanized roll formed steel
  • Full galvanized sheet on barrel
  • Full height polypropylene wear strip on interior and exterior of door
  • Heavy-duty bottom bar with galvanized angle and vinyl astragal (weather strip)
  • 18 gauge hot-dipped galvanized steel guides
  • Inside bottom bar lock standard
  • Manual drive (unless indicated)
  • Available up to 14' wide and 16' high

Paint System Warranty
Our doors have a limited 20 year warranty against paint chalking, peeling or cracking.

Minimal Backroom Required
No horizontal track. Door rolls up above doorway.

Reduced Drive Chain Hoist
MODEL 270H ONLY
Optional on doors up to 10' wide x 10' high. Standard on doors over 10' wide x 10' high.

 

260H

270H

EZ-SET® Roll-Up
Spring System (Winding)
X  
EZ-SET® Roll-Up
Spring System (Ratchet)
  X
Motor Operated Option   X
Radial Ball Bearings X X
Siliconized Polyester
Paint System
X X
Mini Lock Latch X  
Double Inside Slide Lock   X
Enclosed Barrel Assembly X X
Nylon Strapping on
Edges of Curtain
  X

SILICONIZED POLYESTER PAINT COLORS


Glossy White

White

Silhouette Gray

Buckskin

Desert Tan

Continental Brown

Bronze

Cedar Red

Valentine Red

Tangerine

Sunset Orange

Marine Green

Teal

Dark Teal

Fern Green

Evergreen

Forest Green

Royal Blue

Polar Blue

INSTALLATION INFORMATION

Measure Your
Rough Opening

______by______ = size door you need
A (width) B (height)

Note: Measure opening in feet and inches.

Determine Bracket Mounting Surface Areas

Refer to the height chart below for
minimum areas required for your door to operate correctly.

Determine Clearance Areas

Refer to the height chart below for
minimum areas required for your door to operate correctly.

260H

DOOR HEIGHT
Up to 7'4" 7'5"– 8'8" 8'9"– 10' 10'1"– 14'
C = Header
Bracket Width
4" 4" 4" 4"
D = Header
Bracket Height
7½" 7½" 7½" 7½"
E = Sideroom 4" 4" 4" 4"
F = Backroom 17" 17½" 18¼" 19¼"
G = Headroom 15½" 16" 17" 18"

270H

DOOR HEIGHT
Up to 8' 8'1"– 10' 10'1"– 14' 14'1"– 16' 16'1"– 18'
C = Header
Bracket Width
8½" 8½" 8½" 8½" 8½"
D = Header
Bracket Height
9" 9" 9" 9" 9"
E = Sideroom 6" 6" 6" 6" 6"
F = Backroom 19" 21" 22" 23" 24"
G = Headroom 17" 19" 20" 21" 22"

All steel used in this product is 100% recyclable at the end of its useful life.

Open Close